| Most viewed |
The finished product!116 viewsHere you can see the finished cabinet, with Heavy Barrel loaded.
|
|
My custom Mamewah screen67 viewsHere's a shot of the Mamewah layout I made, based on Ikari Warriors' bezel.
|
|
Control panel 1st test66 viewsI hooked the panel up to my computer once it was all wired, and fired up The Legend of Kage. It played great, although playing on the floor wasn't the most comfortable situation.
|
|
Panel overlay attached37 viewsHere I've got the control panel sitting on the cabinet, and the overlay is in place. I've cut all the holes out with an xacto #11 knife. Be careful, they are extremely sharp.
|
|
Rigging power to the Druin board37 viewsGetting power to the rotary interface board was a pain. We ended up taking a butt joint from Radio Shack and connecting one end to the ground wire, and the other to the second power connection on the I-PAC. The first power didn't work.
|
|
33 views
|
|
The failed experiment33 viewsHere's the cd audio cable installed.
|
|
Coin buttons31 viewsThis is a shot of all 4 coin buttons. The flash destroys the colors, but you can see all four coin graphics from Gauntlet. Since I wanted to re-create this feature from Gauntlet, I chose to keep all coin buttons together rather than putting a coin button near each player.
|
|
Wiring the Druin rotary interface31 viewsHere you can see a close-up of the Druin board.
|
|
29 views
|
|
Thyra29 viewsClose-up of Thyra, the Valkyrie from Gauntlet.
|
|
Butt connectors28 viewsThis is the package of butt connectors that I purchased in order to get power to the rotary interface. We only ended up needing two of these I think. If you can avoid buying at Radio Shack, do it, since they are so over-priced.
|
|
|
|
